FOK Cable Blowing Machine

FOK Cable Blowing Machine provides an excellent flexibility and compact design to the users offering a complete solution. Capable of installing the cables -Fiber optic cable and micro duct -. For cables Ø 9 to 22 mm and ducts OD 20 to 50 mm. FOK Cable Blowing Machine is engineered for blowing Fiber optic cables in preinstalled ducts. This multifunctional machine is easy to use for the installation of cables and micro-ducts by air and covers a wide range of cable diameters.

Its high effectiveness significantly increases daily production. The pallet drive system ensures excellent cable grip without damage and the clamping system absorbs cable diameter tolerances. In addition to that, its high tech engineered design and structure improve blowing performance. Each and every part of machine are engineered and produced to meet and exceed the expectation of customer requirements.

FOK cable blowing machine designed to blow cables into preinstalled telecommunication ducts and micro ducts by using of compressed air. Having 3 pallet options as 9-14mm, 14-18mm and 18-22mm to blow the cables having min 9mm to max. 22mm with a speed of 80m/min. Duct diameter can be in the range of 20 mm to 50 mm. You can install your cable in muddy field with our special designed pallets. FOK Cable Blowing Power will not decrease. You can set cable installing speed and direction with control valve. Special designed exit box supplies productive guiding for pressure air into preinstalled duct. Quick air connection makes your business easier with an easy plug in method. You can transfer lubricant oil onto pre-installed duct with the shock lubrication system to reduce friction between duct and cables. Your installing power never decrease with two air motors. You can open and close air entering into duct or machine with valves. Festo Lubricant system takes off moisture of pressured air which comes from compressor and supplies continuous lubricate for air motors.


  • 1set (2pcs) of Pallet (1)
  • 1pcs Duct Lubricant System (2)
  • 2pcs Air Motor (3)
  • 1pcs Air Lubrication System (4)
  • 1set Cable Aligning Parts (5)


  • 1pcs Operator Guide
  • 1pcs Cable Inserts (7)
  • 1set Duct Inserts(8)
  • 1 set Blue Nutring (9)
  • 2m Black Rubber O-Ring (10)
  • 1pcs Protected Wooden Case with holder (11)
  • 1pcs Quick Insert Air Jack (12)
  • 1set Tool Kit (13)
  • 1pcs Box for plastic tools


  • Air Cooler
  • Lubricant Oil
  • Air Compressor

Technical Data


Standard version FOK – with 2pcs of pneumatic motor drive
Type FOK
Cable dia. [mm] 9-22
Duct OD [mm] 20-50
Drive unit Pneumatic
Max. air consumption of 1pcs of motor [m3/min] 1 (at 4 bar)
Torque Nm – Max. Power 8,5
Max. distance to blow at once (Cable Dia. 12mm – Duct Dia. 40mm) (m) 3000
Linear pressure on cable [N/cm] 0-101
Max. speed [m/min] 80
Max. air pressure [bar] 16
Max. water pressure [bar] 23

FOK Cable Blowing Machine

Our standard UP-FOC Fiber Optic Air Blowing Machine production is for 50 mm duct dia. So we can produce regulating parts for various diameters. These regulating parts are for less diameter. For higher duct diameters exit box duct diameter must be lathed for your duct diameter.

If you need different regulating parts for different diameters, then you must inform your duct diameter with your order. Prices exclude the regulating parts.

Fiber Optic Cable Diameter

We have two types of machines for cable diameters. The standard cable diameter ranges are below. You must inform us about your cable diameter with your order. We can provide you spare parts for various cable diameters (palette etc.). (Our machine’s price doesn’t include these extra spare parts)