Kucuksu Rasathane
Uskudar Istanbul Turkey
Mon–Fri 09:00–18:00 (GMT+3)
Weekend: Closed
ElektroFOK Cable Blowing Machine
The ElektroFOK Cable Blowing Machine is an electric cable blowing machine engineered for fast and controlled micro cable installation in telecommunication ducts and microducts. It is designed for Ø1–Ø8 mm micro cables and supports duct sizes from Ø4–Ø18 mm, delivering up to 1,000 meters blowing distance (project dependent).
Explore the full range of cable blowing machines or request a quote with your cable and duct details.
Why ElektroFOK?
- Electric motor drive for stable pushing force and precise control
- Micro cable compatibility: Ø1–Ø8 mm
- Microduct/duct compatibility: Ø4–Ø18 mm
- Up to 1,000 m installation distance (depends on cable/duct route and conditions)
- Up to 90 m/min blowing speed (subject to external motor capacity and site conditions)
- Operator-friendly monitoring via 4.3” touchscreen HDMI panel (length, torque, speed)
- Remote control for convenient operation
Technical Specifications
| Operating Pressure | Up to 15 bar |
|---|---|
| Cable Diameter Range | Ø1 mm to Ø8 mm |
| Duct Diameter Range | Ø4 mm to Ø18 mm |
| Blowing Distance | Up to 1,000 meters (project dependent) |
| Blowing Speed | Up to 90 m/min (subject to external motor capacity) |
| Weight | 17.8 kg (without packaging) / 24.1 kg (with packaging) |
| Dimensions (with packaging) | 41 × 41 × 32 cm |
Accessories & Configuration
ElektroFOK can be configured with accessories selected to match your cable and duct diameters:
- Drive rollers for different cable sizes (Ø1–Ø8 mm)
- Nutring seals for cable OD sealing and air efficiency
- Duct connection tools for Ø4–Ø18 mm ducts
For correct configuration, share your cable diameter, duct diameter and route conditions. This prevents over-buying accessories and keeps the setup efficient.
Compare ElektroFOK with Other UPCOM Machines
- MikroFOK: pneumatic FTTH micro cable installation platform.
- FOK Cable Blowing Machine: pneumatic solution for larger cable ranges (backbone / feeder applications).
- HidroFOK: hydraulic heavy-duty option for bigger cables and long-distance deployments.
Need a practical overview? See: How does a cable blowing machine work? and fiber optic blowing tips.
External reference (concept overview): Cable blowing (Wikipedia).
How to Blow Micro Cables with ElektroFOK (Quick Guide)
- Select and install the correct nutring seal according to cable diameter.
- Install the suitable drive rollers for your cable OD and align the cable entry.
- Connect the duct using the appropriate duct connection tool (Ø4–Ø18 mm).
- Connect the compressor and pressurize the system (up to project-required pressure).
- Set speed/torque on the touchscreen HDMI panel, then start blowing.
- Monitor length, torque, and speed; fine-tune settings and use remote control if needed.
For a tailored setup, use the quote form or email info@upcom.com.tr.
Video
FAQ
What cable diameters can ElektroFOK install?
ElektroFOK is designed for micro cables from Ø1 mm to Ø8 mm.
What duct sizes are supported?
Compatible with duct and microduct diameters from Ø4 mm to Ø18 mm, using the correct duct connection tools.
How far can ElektroFOK blow the cable?
Up to 1,000 meters depending on cable/duct condition, route bends, lubricant use, and site parameters.
Do I need a hydraulic power unit?
No. ElektroFOK uses an electric motor drive. Hydraulic power units are relevant to hydraulic models such as HidroFOK.
What information should I share before ordering?
At minimum: cable diameter, duct diameter, estimated route length, and bend density. This ensures correct rollers, seals, and connectors.
Where can I get configuration support?
Use the quote page or email info@upcom.com.tr.