Mini-FOK Cable Blowing Machine provides an excellent flexibility and compact design to the users offering a complete solution. Allows you to blow the cables -micro type cable and micro-duct-. Mini-FOK Cable Blowing Machine can install the cables in a range of Ø 4 to 16 mm and various ducts outer diameters 10 to 40mm are available upon request. Customized Duct diameter can be made upon request. Mini-FOK is engineered for blowing telecommunication cables or micro ducts in preinstalled ducts. This multifunctional machine is easy to use for the installation of cables, micro-cables or micro-ducts by air and covers a wide range of cable diameters.
Mini-FOK Machine has a significant productivity and it considerably increases your labor’s production capacity. A special and carefully designed pallet system assuring an excellent cable drip and decrease the damage risk. Clamping system adjust the cable outer diameter fluctuation/tolerance. In addition to that, its high-tech engineered design and structure improve blowing performance. Each and every part of machine are engineered and produced to meet and exceed the expectation of customer requirements. Mini-FOK it is equipped with a distance and speed indicator.
Mini-FOK is a Fiber optic cable blowing machine designed to install the cables into telecommunication ducts and micro ducts by using of compressed air. Having 3 pallet options as 4-8mm, 9-12mm and 13-16mm to blow the cables having 4mm to max. 16mm. This fiber optic cable blowing machine works with one air motor for blowing the cables and tubes. Due to 1 air motor, it can perfectly blow fiber optic cables into ducts. So, it’s a perfect choice If fiber optic cable diameter is 6mm and duct diameter is 16mm.
Special pallet design will allow you to install your cables under muddy field conditions and Cable Blowing Power will not be decreased. You can set cable installing speed and direction with control valve. A wisely designed exit box will supply highly productive leading for pressured air into telecom ducts. Quick air connection makes your business easier with an easy plug-in method. It’s completely Made in Turkey with international standards.
Single air motors will ensure to continuous high effective cable blowing power. You are capable of switching on or off the air entering into telecom ducts with guidance of valves. Festo Lubricant system takes off moisture of pressured air which comes from compressor and supplies continuous lubricate for air motors.
Content
CONSISTING OF:
WITH:
WITHOUT:
Pneumatic
Standard version | 1pcs of pneumatic motor drive |
Type | Mini-FOK |
Pallet Options (mm) | 4-8 / 9-12 / 13-16 |
Cable dia. [mm] | 4-16 |
Duct OD [mm] | 7-32 |
Drive unit | Pneumatic |
Max. air circulation of motor [m3/min] | 1 (at 4 bar) |
Torque Nm – Max. Power | 8,5 |
Max. distance to blow at once (Cable Dia. 6mm – Duct Dia. 16mm) (m) | 1500 |
Linear pressure on cable [N/cm] | 0-101 |
Max. speed [m/min] | 80 |
Max. air pressure [bar] | 16 |
Max. water pressure [bar] | 23 |
Dimension of tools and accessories case l x w x h [mm] | 640 x 460 x 440 |
Total weight [kg] | 49 |
Recommended Air Compressor
COMPRESSOR M17A
Efficiency | 1,0 m3/min |
Working pressure | 15 bars |
These are minimum compressor requirements up to Duct Dia. 20mm. You may use higher capacity of compressor which can increase the effectiveness. You can overcome the handicap of improperly installed ducts.