Setup wizard

MiniFOK Setup Wizard

Enter measured MiniFOK job data to recommend verified accessories and review basic application suitability. Accessory selection must still be verified before operation.

Machine model

This setup page is fixed for MiniFOK. Confirm the machine label before using the captured data for support review.

What this wizard can do

Recommend MiniFOK rubber pallet set, nutring, nutring seat and duct connection tool.
Check cable OD against the MiniFOK range.
Check duct ID for fill ratio and clearance reference.
Show application warnings when values require review.
Does not provide pressure values, feed values, compressor data or ERP codes.

Cable outside diameter

MiniFOK published cable range is 2.5-12 mm. Use the measured outside diameter.

Duct connection size / duct OD

Used for duct connection tool selection.

Duct ID

Used for fill ratio and application reference checks. Leave empty if unknown.

Measurement use

Duct connection size / duct OD is used for duct connection tool selection.
Duct ID is used for engineering and application checks.

Installed setup details

Input required

Enter measured cable diameter

Enter measured MiniFOK job data to recommend accessories and review engineering reference values.

Measurement check

Cable ODNot entered
Duct connection size / duct ODNot entered
Duct IDNot entered

Recommended accessories

Rubber pallet setEnter cable OD
NutringEnter cable OD
Nutring seatEnter cable OD
Duct connection toolEnter duct connection size to select duct connection tool

Accessory status notes

Enter measured cable OD before selecting accessories.

Engineering reference

Diameter fill ratioNot checked – Enter duct ID to check fill ratio.
Area fill ratioNot checked
Radial clearanceNot checked
Application size statusNot checked

Field checks before operation

Confirm cable OD with caliper.
Confirm duct connection size / duct OD.
Confirm duct ID if fill ratio is being used.
Confirm selected nutring is seated correctly.
Confirm rubber pallet set is installed correctly.
Check visible air leakage.
Stop if cable slips, jams, or feeding becomes unstable.

Setup summary

Model: MiniFOK
Cable OD: Not entered
Duct connection size: Not entered
Duct ID: Not entered
Diameter fill ratio: Not checked
Area fill ratio: Not checked
Radial clearance: Not checked
Rubber pallet set: Not selected
Nutring: Not selected
Nutring seat: Not selected
Duct connection tool: Not selected
Warnings: None
Need: enter measured cable OD

Contact support
Open troubleshooting

Verification caution

Accessory recommendations do not include ERP codes, stock status, pressure values, feed values or compressor data. Verify selected accessories and application suitability before operation.

MiniFOK Setup Wizard

UPCOM Telekomunikasyon

Product Range