Kucuksu Rasathane
Uskudar Istanbul Turkey
Mon–Fri 09:00–18:00 (GMT+3)
Weekend: Closed
UPCOM Telekomunikasyon • Shielded data LAN cable
CAT 7A+ S/FTP Cable
CAT 7A+ S/FTP cable is built for high-bandwidth structured cabling projects that need 23 AWG bare copper conductors, pair-by-pair foil shielding and an overall tinned copper braid for stable signal integrity up to 1500 MHz. It is a strong fit for installations where EMI control, shielded construction and reliable copper transmission matter.
- 23 AWG bare copper
- Up to 1500 MHz
- S/FTP shielding
- PVC / HFFR / PE jacket options
CAT 7A+ S/FTP cable overview
This CAT 7A+ S/FTP cable is designed for shielded copper data infrastructure where higher bandwidth headroom and stronger protection against external interference are priorities. The structure combines individually foil-screened pairs with an overall tinned copper braid, helping the cable perform more consistently in electrically demanding installation paths.
For projects that balance technical performance with practical installation requirements, the cable also offers jacket alternatives in PVC, HFFR or PE. That makes it easier to align the same core cable family with indoor building routes, low-smoke requirements or project-specific outdoor preferences.
1500 MHz
Suitable for high-frequency data LAN installations.
23 AWG
Solid bare copper conductor structure.
S/FTP
Individual pair foil plus overall braided shield.
305 / 500 m
Typical packing options listed in the datasheet.
CAT 7A+ S/FTP cable construction
Conductor
Solid bare copper core
The cable uses 23 AWG bare copper conductors to support stable electrical performance in structured cabling environments.
Insulation
Skin / foam / skin PE insulation
This insulation structure supports transmission stability while helping preserve the cable geometry required for controlled impedance.
Shielding
Pair foil + overall braid
Each pair is wrapped with Al-Pet foil and the full cable is protected by tinned copper wire braiding for stronger shielding performance.
Why S/FTP shielding matters
- Helps reduce the effect of electromagnetic interference in busier cable pathways.
- Supports cleaner transmission where shield continuity and signal stability are important.
- Improves suitability for higher-performance shielded copper infrastructures.
Jacket options for different project needs
- PVC for standard indoor routing where permitted by project requirements.
- HFFR for low-smoke, halogen-free expectations in selected building specifications.
- PE for routes where the project prefers a PE outer sheath option.
Standards note: This cable family is presented with compliance references including EIA/TIA-568-C.2, ISO/IEC 11801, IEC 61156-5 and EN 50173-1 in the existing datasheet. For general structured cabling background, you can review the official ISO/IEC 11801 and IEC 61156-5 references.
CAT 7A+ S/FTP cable technical properties
The table below reorganizes the current datasheet values into a more readable format for buyers, spec writers and installers evaluating a shielded Category 7A+ copper cable.
| Mechanical properties | Value | Electrical properties at 20°C | Value |
|---|---|---|---|
| Copper weight | 34.5 kg/km | Max. conductor resistance | 9.5 Ω / km |
| Min. bending radius during draw-in | 62 mm | Max. resistance unbalance | < 2% |
| Min. bending radius permanently installed | 32 mm | Min. insulation resistance | 5000 MΩ x m |
| Max. tensile strength | 92 N | Mutual capacitance | 43 pF / m |
| Min. crush resistance | 1000 N / 10 cm | Max. capacitance unbalance | 1600 pF / km |
| Min. impact | 10 impacts | Impedance at 100 MHz | 100 ± 5 Ω |
| Installation temperature | 0°C to +50°C | Velocity of propagation | 79% |
| Operating temperature | -30°C to +70°C | Delay skew | 25 ns / 100 m |
| Packing | 305 / 500 m | Min. TCL / coupling attenuation / transfer impedance / test & operating voltage | Level 2 / Type 1 / Class 1 / 1000 V / 125 V |
Practical note: Jacket choice can change weight and fire-performance classification. If your project is driven by CPR or installation environment requirements, confirm the exact build before quotation and approval.
Applications for CAT 7A+ S/FTP cable
CAT 7A+ S/FTP cable is suited to high-performance copper LAN projects where shielding quality and bandwidth margin are more important than using a simpler unshielded construction. Based on the current product information, the cable is used across structured cabling scenarios including Ethernet, Fast Ethernet, Gigabit Ethernet, 10GBase-T and PoE / PoE+ environments.
Enterprise cabling
Office and commercial buildings
A practical choice for structured building networks where shielded copper routes are preferred for performance consistency and noise control.
Industrial preference
Electrically busier pathways
The S/FTP design is relevant where cable routes run close to equipment or infrastructure that can increase interference risk.
PoE readiness
Data and power on one channel
Suitable for projects that combine network transmission with PoE or PoE+ powered devices within a shielded copper design approach.
When to choose this cable
- When the project wants a shielded cable family with higher bandwidth headroom.
- When pair shielding and an overall braid are preferred instead of a lighter screen design.
- When the route, environment or specification makes EMI management more important.
When to compare alternative LAN cables
- Use CAT 6 SF/UTP where Class E level and 250 MHz may be sufficient.
- Use CAT 5e U/UTP for more basic voice and data infrastructure.
- Review CAT 7 S/FTP or CAT 7A S/FTP for nearby shielded family options.
How to choose CAT 7A+ S/FTP cable
This short selection flow helps turn the datasheet into a practical decision checklist for consultants, contractors and export buyers.
01
Define the installation environment
Start with the routing conditions: building interior, conduit path, equipment room density and whether the project prefers a shielded copper network throughout the channel.
02
Match the jacket to the project specification
Choose PVC, HFFR or PE according to the required fire behaviour, environmental exposure and specification language used by the project.
03
Confirm bandwidth and shielding expectations
If the design needs a high-bandwidth shielded cable with pair foil and overall braid, CAT 7A+ S/FTP can be the stronger fit than lighter shielded or unshielded alternatives.
04
Check installation limits early
Before ordering, review bending radius, tensile strength, installation temperature and packing format so the field team does not work against the cable design.
05
Link the cable with the wider project cluster
For broader family comparison, review the full fiber optic and data LAN cable range. If the project specification is driven by fire-performance language, also review the CPR compliant cables guide. For ducted installation workflows, you may also look at UP-S-LUB-20 cable blowing lubricant.
FAQ about CAT 7A+ S/FTP cable
What does S/FTP mean on a CAT 7A+ cable?
S/FTP means the cable combines individual foil shielding on each twisted pair with an overall screen. On this product family, the overall screen is described as a tinned copper braid, which supports stronger shielding performance than a basic unshielded build.
Where is CAT 7A+ S/FTP cable typically used?
It is used in structured copper cabling projects where buyers want a shielded LAN cable with higher bandwidth headroom, better EMI control and support for Ethernet, Gigabit Ethernet, 10GBase-T and PoE-oriented network layouts.
Does CAT 7A+ S/FTP cable support PoE applications?
The current product information lists PoE and PoE+ among the supported applications. Final suitability should still be checked against the full channel design, installation practice and the active equipment plan.
Which outer sheath should I choose: PVC, HFFR or PE?
Choose the sheath according to the installation environment and specification. PVC is typically used for standard indoor routes, HFFR is preferred where low-smoke halogen-free performance is requested, and PE may be chosen for project routes that require a PE jacket option.
How should I compare CAT 7A+ S/FTP with other LAN cable options?
Start with shielding level, bandwidth target, project specification and route conditions. If you need a simpler or lower-bandwidth option, compare this page with CAT 7 S/FTP, CAT 6 SF/UTP and CAT 5e U/UTP within the same UPCOM cable family.