After-use cleaning
- Clean visible cable contact surfaces.
- Remove visible dust, debris, and contamination.
- Clean the entry area and visible duct connection surfaces.
- Do not store the machine dirty after use.
Kucuksu Rasathane
Uskudar Istanbul Turkey
Mon–Fri 09:00–18:00 (GMT+3)
Weekend: Closed
After-use checks
MikroFOK Maintenance
Use these checks after operation and before storage or the next job.
Model: MikroFOK
Cable range: 1-6 mm
Cable range: 1-6 mm
Maintenance safety
Stop operation and isolate the machine before inspection or cleaning. Follow the official manual and site safety rules.
Routine inspection
- Inspect cable pushing rolls for visible wear.
- Inspect cable nutring / seal condition.
- Check duct connection tools for visible damage.
- Check hoses and fittings before the next job.
Before storage
- Release pressure using site procedure.
- Disconnect only after the machine is safe.
- Keep the machine dry and protected.
- Protect the machine from impact and contamination.
When to contact support
- Repeated slipping.
- Repeated entry jams.
- Unstable feeding.
- Visible damage or abnormal wear.
- Uncertainty about the installed setup.
Need support after inspection?
Send MikroFOK details, serial number, measured job data, and a short description of the issue if you find repeated wear or abnormal behavior.