Before you start
- Confirm the machine label shows MiniFOK.
- Record the serial number.
- Measure cable outside diameter and duct inside diameter.
- Inspect visible air connection and cable path.
- Confirm the setup is clean and stable before operation.
Kucuksu Rasathane
Uskudar Istanbul Turkey
Mon–Fri 09:00–18:00 (GMT+3)
Weekend: Closed
Field preparation
MiniFOK Quick Start
Use these checks before operation and before requesting support.
Model: MiniFOK
Cable range: 2.5-12 mm
Cable range: 2.5-12 mm
Safety note
Stop operation before inspection, cleaning, or adjustment. Follow the official manual and site safety rules.
Setup check
- Use verified UPCOM setup guidance for this model.
- Confirm cable path alignment.
- Check visible contact surfaces and entry area.
- Use the setup wizard to capture measured job data.
Start procedure
- Position the machine on a stable working area.
- Prepare cable, duct, and air connection according to the official manual.
- Start only after the setup is checked.
- Increase only after movement is smooth and controlled.
Stop procedure
- Stop cable movement.
- Shut off air supply using site procedure.
- Release pressure before disconnecting.
- Clean visible debris and record any issue.
Problem during start?
Do not force the cable. Open troubleshooting or send MiniFOK machine and job details to support.