header-icon-2

Kucuksu Rasathane

Uskudar Istanbul Turkey

header-icon-3

Mon–Fri 09:00–18:00 (GMT+3)

Weekend: Closed

English العربيةEN AR
EN English AR العربية

UPCOM
Field Support

Setup review

DrillFOK Setup Wizard

Enter measured DrillFOK job data to review cable, duct, and UPCOM Code references before support handoff.

Machine model

This setup page is fixed for DrillFOK. Confirm the machine label before using the captured data for support review.

What this wizard can do

  • Check cable OD against the DrillFOK 1-8 mm range.
  • Show DrillFOK drive roller and cable nutring / seal references.
  • Check duct OD / connection size by exact matching only.
  • Show engineering reference values from duct ID.
  • Show application warnings when measurements require support review.


DrillFOK published cable range is 1-8 mm. Use the measured outside diameter.


Exact DrillFOK duct references are 8 / 12 / 16 / 18 mm. No tolerance matching is applied.


Used for fill ratio and radial clearance engineering reference.


Setup reference caution

This wizard provides setup reference only. It does not provide pressure values, feed values, compressor data, availability data, or internal system codes. Verify selected setup and application suitability before operation.

Troubleshoot
Contact
EN AR
EN English AR العربية