Parts support

ElectroFOK Spare Parts

Use verified UPCOM Code references to prepare ElectroFOK spare part requests with measured job data and photos.

Machine reference

ElectroFOK uses UPCOM Code 4000 as the machine reference. It is not a selectable spare part row.

Selected items: 0

Select one or more verified ElectroFOK spare parts and send them in one request.

UPCOM Code	Spare Part	Size / Range	Used For	Request Note	Action
4104	Duct Connection Tool	8 mm	Duct connection	Confirm duct OD / connection size before requesting.	Request by email
4105	Duct Connection Tool	12 mm	Duct connection	Confirm duct OD / connection size before requesting.	Request by email
4106	Duct Connection Tool	16 mm	Duct connection	Confirm duct OD / connection size before requesting.	Request by email
4107	Duct Connection Tool	18 mm	Duct connection	Confirm duct OD / connection size before requesting.	Request by email

Duct tool support review

For 4 mm, 10 mm, 14 mm, or non-standard duct connection requests, contact UPCOM support with measured duct details and photos. A separate UPCOM Code was not verified in the provided code list unless shown in the UPCOM Code table above.

Datasheet accessory references without separately verified UPCOM Code

Drive Roller Set DR1 — Cable OD 1–2 mm.
Drive Roller Set DR2 — Cable OD 2.5–4 mm.
Drive Roller Set DR3 — Cable OD 5–8 mm.
Cable Aligning Parts C1 — Cable OD 1–2 mm.
Cable Aligning Parts C2 — Cable OD 3–4 mm.
Cable Aligning Parts C3 — Cable OD 5–6 mm.
Cable Aligning Parts C4 — Cable OD 7–8 mm.
Duct Connection Tool D1 — 4 mm.
Duct Connection Tool D3 — 10 mm.
Duct Connection Tool D5 — 14 mm.

These datasheet accessory references are listed for support review. A separate UPCOM Code was not verified in the provided code list unless shown in the UPCOM Code table above.

Cable Nutrings & Seals reference

N1 — Cable OD 1 mm.
N2 — Cable OD 2–2.5 mm.
N3 — Cable OD 3 mm.
N4 — Cable OD 4 mm.
N5 — Cable OD 5 mm.
N6 — Cable OD 6 mm.
N7 — Cable OD 7 mm.
N8 — Cable OD 8 mm.

UPCOM Code family 4108–4112 is referenced for ElectroFOK cable nutring and seal support, but exact size descriptions were not verified in the project files.

What to include in a spare part request

Machine model.
Serial number if available.
Cable outside diameter.
Duct OD / connection size.
Duct ID if known.
Installed setup details.
UPCOM Code if known.
Photos of the worn or damaged part.
Short description of the issue.

Need ElectroFOK spare part support?

Send photos, machine details, and setup information so UPCOM can help identify the correct part.

Contact support
Open troubleshooting

ElectroFOK Spare Parts

ElectroFOK spare part code reference

Datasheet accessory references without separately verified UPCOM Code

Cable Nutrings & Seals reference

What to include in a spare part request

Need ElectroFOK spare part support?

UPCOM Telekomunikasyon

Product Range