After-use cleaning
- Clean visible contact surfaces.
- Remove visible dust, debris, and contamination.
- Clean the entry area and visible duct connection surfaces.
- Keep the machine dry, clean, and protected.
Kucuksu Rasathane
Uskudar Istanbul Turkey
Mon–Fri 09:00–18:00 (GMT+3)
Weekend: Closed
After-use checks
HidroFOK Maintenance
Use these checks after operation and before storage or the next job.
Maintenance safety
Stop operation and isolate the machine before inspection or cleaning. Follow the official manual and site safety rules.
Routine inspection
- Inspect pallet/contact surfaces.
- Inspect cable aligning parts.
- Inspect nutring/seal condition.
- Inspect duct connection tools.
- Record abnormal wear or repeated field issues.
Connection checks
- Check hoses, fittings, and visible hydraulic/air connection areas according to the official manual.
- Inspect visible duct connection areas before storage.
- Disconnect only after the machine is safe.
- Protect the machine from impact and contamination.
When to contact support
- Repeated slipping.
- Repeated entry jams.
- Unstable feeding.
- Visible damage or abnormal wear.
- Uncertainty about the installed setup.
Need support after inspection?
Send HidroFOK details, serial number, measured job data, and a short description of the issue if you find repeated wear or abnormal behavior.