After-use cleaning
- Clean visible cable contact surfaces.
- Remove visible dust, debris, and contamination.
- Clean the entry area and visible duct connection surfaces.
- Do not store the machine dirty after use.
Kucuksu Rasathane
Uskudar Istanbul Turkey
Mon–Fri 09:00–18:00 (GMT+3)
Weekend: Closed
After-use checks
DrillFOK Maintenance
Use these checks after operation and before storage or the next job.
Maintenance safety
Stop operation and isolate the machine before inspection or cleaning. Follow the official manual and site safety rules.
Routine inspection
- Inspect visible drive/contact components.
- Inspect duct connection area.
- Check hoses and fittings.
- Record abnormal wear or repeated field issues.
Before storage
- Release pressure using site procedure.
- Disconnect only after the machine is safe.
- Keep the machine dry and protected.
- Protect the machine from impact and contamination.
When to contact support
- Repeated slipping.
- Repeated entry jams.
- Unstable feeding.
- Drive engagement uncertainty.
- Visible damage or abnormal wear.
Need support after inspection?
Send DrillFOK details, serial number, measured job data, and a short description of the issue if you find repeated wear or abnormal behavior.